For information only. LabMeans does not provide medical advice or a diagnosis. Always discuss your results with a qualified clinician. Read the full disclaimer.

MSU Sample: What a Mid-Stream Urine Test Is and How to Give One

In short

An MSU (mid-stream urine) sample is a urine test, not a blood test. You start passing urine into the toilet, then catch the middle part of the flow in a sterile pot, and stop before the end. Catching the middle avoids skin and genital bacteria washing into the sample, so the lab can tell a true urinary infection from harmless contamination. It is sent for dipstick, microscopy and culture, and results usually take one to three days.

What MSU (mid-stream urine) means

MSU stands for mid-stream urine, sometimes written MSSU (mid-stream specimen of urine). It is exactly what the name says: a sample taken from the middle of your urine flow rather than the very start or end. It is the standard way to collect urine when a doctor wants to check for a urinary tract infection.

Is MSU a blood test? No — it is a urine test

People often search for "what is MSU blood test", so to be clear: an MSU has nothing to do with blood. It is a sample of your urine, collected in a pot. No needle, no blood draw. The confusion is understandable because both are common lab tests requested by GPs, but an MSU is entirely a urine test. It can, however, detect blood in the urine, which is a separate finding from a blood test.

Why mid-stream?

The opening of the urethra and the surrounding skin are naturally home to bacteria. If you collect the very first part of your stream, it flushes those surface bacteria straight into the pot, and the lab then finds organisms that were never in your bladder at all. That is contamination, and it muddies the result.

By letting the first part of the flow wash the urethra clean and only then catching the middle portion, the sample reflects what is actually in your bladder. This is what makes an MSU reliable enough to base an infection diagnosis and antibiotic choice on, and why the collection technique genuinely matters.

How to collect a clean MSU, step by step

Use the sterile container you are given and do not touch the inside of the pot or its lid. Wash your hands first.

For women

  1. Wash your hands, then sit on the toilet and separate the labia with one hand.
  2. Clean the area from front to back if given a wipe.
  3. Begin passing urine into the toilet, keeping the labia held apart.
  4. Without stopping the flow, move the pot into the stream and catch the middle portion.
  5. Remove the pot, then finish emptying your bladder into the toilet.
  6. Screw the lid on without touching the rim, and label the pot.

For men

  1. Wash your hands. If uncircumcised, retract the foreskin.
  2. Clean the tip of the penis if given a wipe.
  3. Begin passing urine into the toilet.
  4. Without stopping, move the pot into the stream and catch the middle portion.
  5. Remove the pot and finish into the toilet.
  6. Replace the lid without touching the rim, and label the pot.

Ideally use the first urine of the morning, which is most concentrated, and get the sample to the surgery or lab within an hour or two. If there is any delay, keep it in the fridge — bacteria multiply at room temperature and can turn a normal sample into a falsely positive one.

What the lab does with it

An MSU is usually put through three stages, each answering a different question.

How long results take

The dipstick and microscopy are quick, often available the same day. The culture is the slow step because bacteria need time to grow — typically 24 to 48 hours, sometimes up to three days if sensitivities are added. So a full MSU result usually comes back one to three days after the sample reaches the lab. See our guide on how long results take for the wider picture.

What "mixed growth" and contamination mean

If your result says mixed growth or mixed urogenital flora, it usually means several types of bacteria grew, which points to contamination during collection rather than a single infecting organism. A genuine UTI is normally caused by one bacterium growing in large numbers, so a mix of several — often with lots of epithelial cells on microscopy — suggests skin and genital bacteria got into the sample.

This is why you may be asked to repeat the test. It does not mean anything is wrong; it means the sample was not clean enough to interpret, and a fresh, carefully collected mid-stream sample is needed. Our page on mixed urogenital flora explains this result in more depth.

MSU vs CSU vs random sample

MSU is one of several ways urine is collected, chosen for the situation.

Common urine collection methods and when each is used.
TypeWhat it isWhen used
MSU (mid-stream)Middle of the flow, cleanly caughtStandard for suspected UTI
CSU (catheter specimen)Taken from a urinary catheter's sampling portWhen a catheter is already in place
Random / spot sampleAny urine, no mid-stream techniqueQuick screening, or non-infection tests

A CSU is taken from the port of an existing catheter, never by collecting from the bag, and is not started by inserting a catheter just for the sample. A random sample is fine for a general dipstick screen but is not ideal for diagnosing infection because of the contamination risk. For how the findings are read together, see urinalysis results explained and the full urine tests section.

Sources

  1. Clean catch urine sample — MedlinePlus Medical Encyclopedia, U.S. National Library of Medicine
  2. Collection of Mid-Stream Sample of Urine (MSSU) for adults — Gloucestershire Hospitals NHS Foundation Trust
  3. Urine Culture — StatPearls (NCBI Bookshelf)

Links open official health information pages. Reference ranges and advice can differ between laboratories and countries; always follow the ranges on your own report.

Frequently asked questions

What is an MSU sample?

A mid-stream urine sample — urine caught from the middle of your flow in a sterile pot. Catching the middle avoids skin and genital bacteria, so the lab can reliably diagnose a urinary tract infection and choose the right antibiotic.

Is MSU a blood or urine test?

It is a urine test, not a blood test. Despite people searching "MSU blood test", an MSU involves no needle and no blood — you simply provide a urine sample in a container.

How do I give a mid-stream urine sample?

Wash your hands, start passing urine into the toilet, then move the sterile pot into the stream to catch the middle portion, and finish into the toilet. Do not touch the inside of the pot, and get it to the lab within a couple of hours or refrigerate it.

How long do MSU results take?

The dipstick and microscopy are often same-day, but the culture needs 24 to 48 hours to grow, sometimes up to three days with sensitivities. A complete MSU result usually comes back one to three days after the lab receives it.

What does a contaminated MSU mean?

It means skin or genital bacteria got into the sample, often reported as mixed growth or mixed urogenital flora with many epithelial cells. It does not mean you are unwell — it means the sample cannot be interpreted, so you may be asked to repeat it with careful technique.