Anion Gap: Normal Range and What a High or Low Anion Gap Means
The anion gap is a calculated number from your electrolytes: sodium minus (chloride + bicarbonate). A typical normal anion gap is about 4–12 mmol/L, though some laboratories use 8–16 mmol/L, so always use the range on your report. A high anion gap usually means extra acid in the blood (metabolic acidosis) from causes such as diabetic ketoacidosis, lactic acidosis, kidney failure or a poisoning, and can be urgent if you feel unwell. A low anion gap is uncommon and is most often caused by a low albumin level or a laboratory quirk.
How the anion gap is calculated
Your blood must stay electrically neutral, so the positively charged ions (cations) and negatively charged ions (anions) balance. A standard metabolic panel only measures the main ones, so the anion gap estimates the anions that are present but not measured — mostly albumin, plus phosphate, sulphate and small organic acids.
| Formula | Example | Result |
|---|---|---|
| Na+ − (Cl− + HCO3−) | 140 − (104 + 25) | 11 mmol/L — normal |
| Na+ − (Cl− + HCO3−) | 138 − (100 + 12) | 26 mmol/L — high |
| (Na+ + K+) − (Cl− + HCO3−) | Some labs add potassium | Normal range is then about 4 mmol/L higher |
The inputs are your sodium, chloride and CO2 (bicarbonate) results. Because three measured values feed one calculated number, small errors add up — a single borderline anion gap matters far less than the pattern across the whole panel.
Normal anion gap range
| Anion gap (without potassium) | Category | What it usually means |
|---|---|---|
| Below about 3 mmol/L | Low | Low albumin, lab error, or (rarely) an abnormal protein such as in myeloma |
| About 4–12 mmol/L | Normal | No excess unmeasured acid |
| About 13–20 mmol/L | Mildly high | Often dehydration or a lab variation; read with bicarbonate |
| Above about 20 mmol/L | High | Likely high anion gap metabolic acidosis — needs prompt assessment |
What a high anion gap means
A high anion gap means acids that the standard panel does not measure have built up in the blood. The bicarbonate usually falls at the same time, because it is used up buffering the acid. Doctors remember the main causes with the acronym GOLDMARK:
- Ketoacidosis — diabetic ketoacidosis (DKA), alcoholic ketoacidosis or starvation; DKA is the classic emergency cause
- Lactic acidosis — from sepsis, shock, severe dehydration, heart failure, seizures, or drugs such as metformin in kidney failure
- Kidney failure — the kidneys can no longer clear phosphate, sulphate and other acids (uraemia)
- Poisonings — methanol, ethylene glycol (antifreeze), aspirin (salicylate) overdose, and long-term paracetamol use in vulnerable people (5-oxoproline)
- Propylene glycol — a solvent in some intravenous medicines
A mildly raised anion gap with a normal bicarbonate and no symptoms is frequently due to dehydration or simple variation between analysers, and is often just repeated.
Seek emergency care if a high anion gap comes with fast or deep breathing, vomiting, abdominal pain, confusion, drowsiness, very high blood sugar or ketones, or if a poisoning is possible. These can be signs of diabetic ketoacidosis, sepsis or a toxic ingestion.
What a low anion gap means
A low anion gap is uncommon and rarely dangerous in itself. The usual reasons are:
- Low albumin — albumin is the biggest unmeasured anion, so each 1 g/dL (10 g/L) fall in albumin lowers the anion gap by about 2.5 mmol/L. Liver disease, kidney protein loss and malnutrition are common causes.
- Laboratory error — an over-read chloride or bicarbonate, or very high blood fats (lipaemia) in the sample.
- Abnormal proteins — positively charged paraproteins in multiple myeloma can lower the gap; a persistently low or negative anion gap with high globulin warrants protein electrophoresis.
- Medicines and minerals — lithium toxicity, bromide, or very high calcium or magnesium.
Correcting the anion gap for albumin
Because albumin makes up most of the normal anion gap, a low albumin can hide a genuine acidosis. Doctors therefore often calculate a corrected anion gap: add about 2.5 mmol/L for every 1 g/dL that albumin is below 4 g/dL (40 g/L). For example, an anion gap of 12 with an albumin of 2 g/dL corrects to about 17 — a raised value that would otherwise be missed.
High anion gap vs normal anion gap acidosis
| Pattern | Anion gap | Chloride | Typical causes |
|---|---|---|---|
| High anion gap acidosis | High | Normal | DKA, lactic acidosis, kidney failure, toxins |
| Normal anion gap (hyperchloraemic) acidosis | Normal | High | Diarrhoea, renal tubular acidosis, large volumes of saline |
In both, bicarbonate is low; the anion gap tells the doctor which group of causes to look at. A blood gas, glucose, ketones, lactate, kidney function and sometimes a serum osmolality test usually follow.
Sources
- Anion Gap Blood Test — MedlinePlus, U.S. National Library of Medicine
- Biochemistry, Anion Gap — StatPearls (NCBI Bookshelf)
- Basic Metabolic Panel (BMP) — MedlinePlus, U.S. National Library of Medicine
Links open official health information pages. Reference ranges and advice can differ between laboratories and countries; always follow the ranges on your own report.
Frequently asked questions
What is a normal anion gap?
Typically about 4–12 mmol/L when potassium is not included, though some laboratories use 8–16 mmol/L. Always compare with the range on your report.
What does a high anion gap mean?
Usually extra unmeasured acid in the blood — high anion gap metabolic acidosis — from causes such as diabetic ketoacidosis, lactic acidosis, kidney failure or poisoning. A mildly high value with normal bicarbonate is often dehydration or lab variation.
What does a low anion gap mean?
Most often a low albumin level or a laboratory error. Rarely it reflects abnormal proteins such as in multiple myeloma, or lithium or bromide.
Is a high anion gap an emergency?
It can be. A high anion gap with fast breathing, vomiting, confusion, very high blood sugar or a possible poisoning needs emergency care.
How is the anion gap calculated?
Sodium minus (chloride + bicarbonate), all in mmol/L. Some labs also add potassium, which raises the normal range by about 4 mmol/L.